Daikin FTK35JVE9 - Page 339

Outdoor Unit Si18-201
326 Removal Procedure
8. Detaching the control
PCB
1
The control PCB is
located as shown at
right.
2
The setting and self-
diagnostic PCB is
located also as shown
at right.
"
The PCB1 and
PCB4 are integrally
constructed.
3
Disconnect all the
connectors.
Remove the two
screws from the control
PCB.
4
Remove the two
screws from the
electrolytic capacitor.
Step Procedure Points