ECONO Operation
ECONO operation is a function which enables effi cient operation by limiting the
maximum power consumption value.
This function is useful for cases in which attention should be paid to ensure a
circuit breaker will not trip when the product runs alongside other appliances.
To start ECONO operation
Press during operation.
“• ” is displayed on the LCD.
To cancel ECONO operation
Press again.
“• ” disappears from the LCD.
[Example]
Normal operation ECONO operation
In case the air conditioner and other •
appliances which require high power
consumption are used at same time, a circuit
breaker may trip if the air conditioner operate
with its maximum capacity.
The maximum power consumption of the air
•
conditioner is limited by using ECONO
operation.
The circuit breaker will hardly trip even if the
air conditioner and other appliances are used
at same time.
Time
Maximum during
normal operation
Maximum during
ECONO Mode
Normal
operation
ECONO
Mode
From start up until set temperature is reached
Running current and
power consumption
This diagram is a representation for illustrative •
purposes only.
The maximum running current and power
consumption of the air conditioner in ECONO
mode vary with the connecting outdoor unit.
NOTE
Notes on ECONO operation
ECONO operation can only be set when the unit is running. Pressing • causes the settings to be canceled, and the “ ” disappears
from the LCD.
ECONO operation is a function which enables effi cient operation by limiting the power consumption of the outdoor unit (operating •
frequency).
ECONO operation functions in AUTO, COOL, DRY, and HEAT modes. •
POWERFUL and ECONO operation cannot be used at the same time.•
Priority is given to the function of whichever button is pressed last.
If the level of power consumption is already low, ECONO operation will not drop the power consumption.•
01_EN_3P266960-1A.indd 1901_EN_3P266960-1A.indd 19 6/1/2011 9:16:24 AM6/1/2011 9:16:24 AM
To Next Page
Loading...
Need help?
General
