Daikin FTKS25D3VMW(L) - Page 172

SiENBE04-507A Indoor Unit
Removal Procedure 163
Step Procedure Points
5
6
7
8
Remove the drip proof
plate by removing the
screw.
Replace the heat
exchanger thermistor.
Disconnect the earth
wire by removing the
screw.
Remove the screw of
the electrical box.
 Put any excess wires behind
the power supply lead wire.
 Use care not to lose the
retainer of thermistor.
Retainer of
thermistor
Heat exchanger
thermistor
Drip proof plate
Heat exchanger
thermistor
Retainer of
thermistor
Earth wire