Daikin FTKS35DVM - Fan Motor; Prepare Fan Motor Removal

16
ECONO Operation
ECONO operation is a function which enables efficient operation by lowering the maximum power con-
sumption value.
■ To start ECONO operation
1. Press “ECONO button” .
• “ ” is displayed on the LCD.
■ To cancel ECONO operation
2. Press “ECONO button” again.
• “ ” disappears from the LCD.
NOTE
• ECONO Operation can only be set when the unit is running. Pressing the operation stop
button causes the settings to be canceled, and the “ ” disappears from the LCD.
• ECONO operation is a function which enables efficient operation by limiting the power
consumption of the outdoor unit (operating frequency).
• ECONO operation functions in COOL and DRY modes. The fan strength does not change
in ECONO operation.
• POWERFUL operation and ECONO operation cannot be used at the same time.
Priority is given to POWERFUL operation.
• Power consumption may not drop even if ECONO operation is used, when the level of
power consumption is already low.
TEMP
ON/OFF
POWERFUL
MODE
FAN
SWING
QUIET SENSOR
ECONO
MOLD PROOF
TIMER
ON CANCEL
OFF
1, 2
01_EN_3P194550-4C.fm Page 16 Thursday, May 31, 2007 2:52 PM