17
MOLD PROOF Operation
MOLD PROOF operation is a function which reduces the spread of mold by using Fan mode to lower
the humidity inside the indoor unit.
■ To set MOLD PROOF
operation
1. Press and hold the MOLD PROOF
button for two seconds.
• “ ” is displayed on the LCD.
■ To cancel MOLD PROOF
operation
2. Press and hold the MOLD PROOF
button for two seconds one more
time.
• “ ” disappears from the LCD.
NOTE
• MOLD PROOF operation will operate for approximately one hour after dry or cooling mode
is turned off.
• This function is not designed to remove existing dust or mold.
• MOLD PROOF operation is not available when the unit is turned off using the OFF TIMER.
TEMP
ON/OFF
POWERFUL
MODE
FAN
SWING
QUIET
SENSOR
ECONO
MOLD PROOF
TIMER
ON
CANCEL
OFF
1, 2
01_EN_3P194550-4C.fm Page 17 Thursday, May 31, 2007 2:52 PM
To Next Page
Loading...
Need help?
General
