Daikin FTKS35DVM - Front Panel; Open Front Panel; Release Rotary Shafts

Si041251EC Front Panel
Removal Procedure 3
2. Front Panel
Warning

Be sure to wait for 10 minutes or more after turning off all power supplies before
disassembling work.
Step Procedure Points
1
Open the front panel
over the position where
it stops.
2
3
Slide the left rotary
shaft to the right and
release it.
Remove the right rotary
shaft in the same way.

When reassembling the
front panel, fit the right and
left rotary shafts one by one
into the grooves and fully
push them into position.
(R4312)
Front panel
Rotary shaft
(R4313)