Daikin FTKS71JVMG9 - Fan Motor (Without Removing Indoor Heat Exchanger); Remove Upper Fan Motor Fixing Plate

Fan Motor (Without Removing Indoor Heat Exchanger) Si041352ED
22 Removal Procedure
7. Fan Motor (Without Removing Indoor Heat
Exchanger)
Warning

Be sure to wait for 10 minutes or more after turning off all power supplies before
disassembling work.
Step Procedure Points
1 Loosen the screw of the
fan motor from the air
outlet.
2 Remove the screw of
the fan motor fixing
plate (upper).
3 Unfasten the hook at
the front and remove
the fan motor fixing
plate (upper).
4 Release the harness
from the hook, and
remove the screw of the
fan motor fixing plate
(lower).
(R18722)
(R17238)
Fan motor fixing plate (upper)
(R18721)
Hook
(R22256)
Fan motor fixing plate
(lower)