Si041352ED Air Filters / Front Panel
Removal Procedure 3
3. Remove the front panel.
1 Open the front panel
over the position where
it stops.
2 Slide the left shaft to the
right and release it.
When reassembling the front
panel, fit the right and left
shafts one by one into the
grooves and fully push them
into position.
3 Remove the right shaft
in the same way.
4 Remove the front panel.
Step Procedure Points
(R9479)
Front Panel
(R24474)
Left shaft
(R24475)
Right shaft
(R9482)