What to do if Daikin FTXS-A Air Conditioner shows A5?
If your Daikin Air Conditioner is showing the A5 error, here are some things you can check: 1. Make sure the air passage isn't blocked. 2. Inspect the intake air filter. 3. Check for dust on the indoor coil. 4. Examine the wiring and piping. 5. Inspect the EXV. 6. Check the indoor coil and room sensor resistance values. 7. Verify the refrigerant level.
What to do if Daikin FTXS-A Air Conditioner shows U4?
If your Daikin Air Conditioner displays the U4 error code, you can try the following troubleshooting steps: 1. Check the connection wires between the indoor and outdoor units. 2. Check the voltage of the signal terminal. 3. Manually rotate the indoor fan to check for obstructions. 4. Check the power supply waveform.
How to troubleshoot E5 error on Daikin FTXS-A?
To troubleshoot an E5 error on your Daikin Air Conditioner: 1. Check the connection on the discharge pipe sensor. 2. Check the discharge pipe sensor resistance value. 3. Inspect the EXV. 4. Check the refrigerant line for blockages or shortages.
How to troubleshoot Daikin FTXS-A error H6?
To troubleshoot an H6 error on your Daikin Air Conditioner, you can try these steps: 1. Check for a short circuit. 2. Check the electrolytic capacitor voltage. 3. Check the compressor harness wire. 4. Check with inverter checker.
How to troubleshoot Daikin FTXS-A error F6?
To troubleshoot an F6 error on your Daikin Air Conditioner, you can try: 1. Checking the installation space. 2. Checking the outdoor fan. 3. Checking the EXV. 4. Checking the coil sensor.
What to do if Daikin FTXS-A shows error A1?
If your Daikin Air Conditioner is displaying the A1 error, you can: 1. Check the connector connection. 2. Replace the indoor PCB.
How to fix E1 error on Daikin FTXS-A?
To address an E1 error on your Daikin Air Conditioner: 1. Restart the system. 2. Replace the outdoor PCB. 3. Ensure the unit is properly grounded. 4. Check the power supply waveform.
What to do if Daikin FTXS-A shows H0 error?
If your Daikin Air Conditioner is showing the H0 error, you should: 1. Check the reactor connection. 2. Check the compressor connection. 3. Measure the resistance value between the reactor terminals. 4. Measure the resistance value between the compressor terminals.
What to do if Daikin Air Conditioner shows J3 error?
If your Daikin Air Conditioner is showing the J3 error, you should: 1. Check the sensor connection. 2. Check the sensor resistance value. 3. Check the indoor coil sensor resistance value.
General| Series | FTXS-A |
|---|---|
| Inverter | Yes |
| Type | Split System |
| Power Supply | 220-240 V, 50 Hz |
| Noise Level (Outdoor Unit) | 45 dB(A) |
Explains the coding structure for Daikin indoor units.
Explains the coding structure for Daikin outdoor units.
Lists available indoor unit models and their features.
Defines the operational temperature limits for cooling.
Visual guide for unit installation placement and connections.
Details recommended cable sizes for power and interconnection.
Specifies limits for refrigerant piping length and elevation.
Presents sound pressure levels across different frequencies and speeds.
Details technical specifications for indoor units.
Details technical specifications for outdoor units.
Explains how to calculate performance using interpolation.
Provides diagrams and measurements for indoor units.
Shows the electrical connections for specific indoor/outdoor unit models.
Lists components and recommended maintenance schedules.
Explains LED indicators and audible signals for operation and errors.
To Next Page