FTXS09/12DVJU SiUS04-702
186 Removal Procedure
2. Removal of front grille
assembly.
1
Remove the 2 screws,
in the right and the left,
which fix the main body
with the front grille.
Screw stoppers inside the
flap which were equipped in
the existing models are not
provided.
2
Disengage the 2 hooks
on the upper part.
In case that the hooks
are not pressed from
above, remove the front
panel and then remove
the grille while pushing
the hook through a
clearance between the
front grille and the heat
exchanger.
At the upper part there are 2
hooks in the left and the
right.
Disengage the hooks by
pressing knobs with a
screwdriver.
Step Procedure Points
To Next Page
Loading...
