Daikin FTXS09DVJU - Removal of the PCB; Electrical Box

SiUS04-702 RX15/18/24FVJU
Removal Procedure 261
4.3 Removal of the PCB / Electrical Box
Procedure Warning Be sure to wait 10 minutes or more after turning off all power supplies
before disassembling work.
Step
Procedure Points

Remove the top panel
and the front panel.
1. Remove the right side
panel.
Terminal strip number
black (1) ----- power supply
white (2) ----- power supply
red (3) ----- transmission
yellow / green ( ) ----- earth
1
Disconnect the 3
connection wirings and
the 2 earth wires.
2
Loosen the 3 screws of
the right side panel.