Daikin FTXS09DVJU - Power-Airflow Dual Flaps, Wide-Angle Louvres and Auto-Swing

SiUS04-702 Main Functions
Function and Control 21
1.2 Power-Airflow Dual Flaps, Wide-Angle Louvres and Auto-
Swing
Power-Airflow
Dual Flaps
The large flaps send a large volume of air downwards to the floor. The flap provides an optimum
control area in cooling, heating and dry mode.
Heating Mode
During heating mode, the large flap enables direct warm air straight downwards. The flap presses
the warm air above the floor to reach the entire room.
Cooling Mode
During cooling mode, the flap retracts into the indoor unit. Then, cool air can be blown far and
pervaded all over the room.
Wide-Angle
Louvres
The louvres, made of elastic synthetic resin, provide a wide range of airflow that guarantees a
comfortable air distribution.
Auto-Swing The following table explains the auto swing process for heating, cooling, dry and fan :

09/12 Class

15/18/24 Class
Outline of 3-D
Airflow
Alternative repetition of vertical and horizontal swing motions enables uniform air-conditioning of
the entire room. This function is effective for starting the air conditioner.
Detail of the
Action
When the horizontal swing and vertical swing are both set to auto mode, the airflow become 3-D
airflow and the horizontal swing and vertical swing motions are alternated. The order of swing
motion is such that it turns counterclockwise, starting from the right upper point as viewed to the
front side of the indoor unit.
Vertical Swing (up and down)
Horizontal Swing
(right and left: manual)
Cooling / Dry / Fan Heating Heating, Cooling
Vertical Swing (up and down)
Horizontal Swing
(right and left)
Heating Cooling Dry Fan Heating, Cooling
(R2946)
0˚
25˚
0˚
25˚
5˚
30˚
5˚
30˚
(R4013)
50˚
50˚
(R2817)
15˚
55˚
15˚
55˚
(R2813)
10˚
40˚
10˚
40˚
(R2814)
5˚
35˚
5˚
35˚
(R2815)
5˚
55˚
5 ˚
55˚
(R2816)
50˚
50˚
(R2817)


(R1024)