Daikin FTXS09DVJU - Page 206

SiUS04-702 FTXS09/12DVJU
Removal Procedure 195
6
Control PCB.

The control PCB is
integrated with the power
supply PCB.
3. Remove swing motor
assembly.
1
To remove swing motor
assembly, remove 2
screws.
(Manual adjusting for
the vertical blades.)

Provide a supporter so that
the joint link will not drop off,
in case the horizontal blade
assembly is removed.
Step Procedure Points
Glass tabu fuse
3.15A
250V
S7(Fan motor)
S6(Swing motor)
S32
(Heat exchanger thermistor)
JCJBJA
(Address)
S21
(HA terminal)
(R2541)