Daikin FTXS09DVJU - Page 235

FTXS15/18/24DVJU SiUS04-702
224 Removal Procedure
3
Unscrew the flare nut
for liquid piping by 2
wrenches.
2. Remove the indoor unit.
1
Detach the indoor unit
from the installation
plate.
3. Remove the piping fixture.
1
Release the hook on
the upper side of the
piping fixture on the
back of the unit.
4. Remove the heat
exchanger.
1
Widen the auxiliary
piping to the extent of
10°~20°.

At an angle of 10°~20°
Step
Procedure Points