Daikin FTXS09DVJU - Page 274

SiUS04-702 RX15/18/24FVJU
Removal Procedure 263
2. Disconnect harnesses.
1
Loosen the fixing screw
of the cable way board.

Service monitor PCB
2
Push the hook up to
release the cable way
board.
Open the cable way
board.
3
Disconnect the
harnesses from the
power supply PCB.
HL (black) ···· to the
terminal strip
HE2 (yellow / green) ····
to the terminal strip
(earth)
HAC1 (black) ···· from
the control PCB (AC1)
HE1 (yellow / green) ····
from the control PCB
(E)

Power supply PCB
Step
Procedure Points
S52
SW1
ABC
LEDA(Green)
SW4
(Initial setting: OFF)
LED A (Green)
ON
SW4
S102
S2
(R2704)
HE1 V3(varistor)
(soldered)
HE2 HL FU1 250V 30A
HAC1
(R2707)