Main Functions SiUS04-702
32 Function and Control
1.11.4 Air Purifying Filter with Photocatalytic Deodorizing Function
This filter incorporates the benefits the Air Purifying Filter and Photocatalytic Deodorizing Filter in a
single unit. Combining the two filters in this way increases the active surface area of the new filter.
This larger surface area allows the filter to effectively trap microscopic particles, decompose odours
and deactivate bacteria and viruses even for the high volume of air required to air-condition large
living rooms. The filter can be used for approximately 3 years if periodic maintenance is performed.
1.11.5 Mold Proof Air Filter (Prefilter)
The air filter net is impregnated with a safe, odourless mould preventative to make the filter virtually
immune to mould.
1.11.6 Self-Diagnosis Digital Display
The microcomputer continuously monitors main operating conditions of the indoor unit, outdoor unit
and the entire system. When an abnormality occur, the LCD remote controller displays error code.
These indications allow prompt maintenance operations.
1.11.7 Auto-restart Function
Even if a power failure (including one for just a moment) occurs during the operation, the operation
restarts in the condition before power failure automatically when power is restored.
(Note) It takes 3 minutes to restart the operation because the 3-minutes standby function is
activated.
To Next Page
Loading...
