POWERFUL Operation
POWERFUL operation quickly maximizes the cooling (heating) effect in any
operation mode. You can get the maximum capacity.
To start POWERFUL operation
Press during operation.
POWERFUL operation ends in 20 minutes. Then the system automatically operates again with •
the previous settings which were used before POWERFUL operation.
“•
” is displayed on the LCD.
When using POWERFUL operation, there are some functions which are not available.•
To cancel POWERFUL operation
Press again.
“• ” disappears from the LCD.
NOTE
Notes on POWERFUL operation
POWERFUL Operation cannot be used together with QUIET Operation.•
Priority is given to the function of whichever button is pressed last.
POWERFUL Operation can only be set when the unit is running. Pressing the operation stop button causes the settings to be canceled, and the
•
“ ” disappears from the LCD.
In COOL and HEAT mode•
To maximize the cooling (heating) effect, the capacity of outdoor unit must be increased and the airfl ow rate be fi xed to the maximum setting.
The temperature and airfl ow settings are not variable.
In DRY mode•
The temperature setting is lowered by 4.5°F (2.5°C) and the airfl ow rate is slightly increased.
In FAN mode•
The airfl ow rate is fi xed to the maximum setting.
In AUTO mode•
To maximize the cooling (heating) effect, the capacity of outdoor unit must be increased and the airfl ow rate be fi xed to the maximum setting.
POWERFUL Operation will not increase the capacity of the air conditioner if the air conditioner is already in operation with its •
maximum capacity demonstrated.
01_EN_3P232717-1C.indd 1501_EN_3P232717-1C.indd 15 12/22/2008 2:51:34 PM12/22/2008 2:51:34 PM
To Next Page
Loading...
