8
Preparation before Operation
■
To set the clock
1. Press .
• “ ” is displayed.
• “ ” and “ ” blink.
2. Press to set the current day of the
week.
3. Press .
• “ ” blinks.
4. Press to set the clock to the present
time.
• Holding down or rapidly increases or decreases
the time display.
5. Press .
• Point the remote controller at the indoor unit when
pressing the buttons.
•“ ” blinks.
■
Turn the breaker on
• After the power is turned on, the flaps of the indoor unit opens and closes once to set the
reference position.
NOTE
■ Note on setting the clock
• If the indoor unit's internal clock is not set to the correct time, ON/OFF TIMER and
WEEKLY TIMER will not operate punctually.
01_EN_3P266959-2A.fm Page 8 Wednesday, August 25, 2010 9:37 AM
To Next Page
Loading...
