Daikin FTXS60LVMA Service Manual (English)

Other manuals for Daikin FTXS60LVMA

Service Manual38 pages

Operation Manual44 pages

Questions and Answers:

J
James TaylorAug 7, 2025
What to do if my Daikin Air Conditioner operation stopped suddenly and the operation lamp flashes?
- E
  estradabrittanyAug 7, 2025
  If your Daikin Air Conditioner suddenly stops and the OPERATION lamp flashes, try these steps: Clean the air filters. If that doesn't work, turn the breaker off, remove any obstacles, and then turn the breaker back on. Try operating the air conditioner with the remote controller again. Also, set all indoor units to the same operation mode. If using “AUTO”, switch all indoor units to “COOL” or “HEAT” temporarily to see if the flashing stops.
D
David DoyleAug 14, 2025
Why doesn't hot air flow out immediately from my Daikin Air Conditioner after starting heating?
- L
  larry64Aug 14, 2025
  If hot air doesn't flow out immediately when you start the heating operation on your Daikin Air Conditioner, wait for 1 to 4 minutes. The system is designed to start discharging air only after it has reached a certain temperature.
L
Larry RodriguezAug 22, 2025
Why doesn't the ON/OFF TIMER operate according to the settings on my Daikin Air Conditioner?
- T
  Tracy PhamAug 22, 2025
  If the ON/OFF TIMER on your Daikin Air Conditioner isn't working as set, change or deactivate the settings in the WEEKLY timer.
H
Henry LaraAug 30, 2025
Why is the cooling or heating effect poor in my Daikin FTXS60LVMA?
- J
  jesus15Aug 30, 2025
  If your Daikin Air Conditioner isn't cooling or heating well, several factors could be the cause. First, ensure the air filters are clean. Check if anything is blocking the air inlet or outlet of the indoor and outdoor units. Verify that the temperature setting is appropriate for your needs and that all windows and doors are closed properly. Lastly, confirm that the airflow rate and direction are set correctly for optimal performance.