Daikin FTXS60LVMA - Vertical Swing Motor Removal

Removal of Horizontal Blades / Swing Motors Si041144
24 Removal Procedure
7
Remove the swing
motors. Caution
When reassembling, do not
confuse the installing order of
the 2 motors and the colors of
the connectors.
If you set the connectors or
motors opposite, the
horizontal blades do not
move smoothly or noise may
be heard.
(1) Set the swing motor of the
upper blade first.
(connector: white)
(2) Then, set the swing motor of
the lower blade.
(connector: red)
(3) Fix both swing motors with a
screw.
8
Disconnect the
connector to remove
the swing motor.
5. Remove the swing motor
for vertical blades.

Some models have no swing
motor for vertical blade.
1
Remove the link cover.
Step Procedure Points
(R16079)
Swing motor (lower blade)
Swing motor (upper blade)
(R9551)
(R9552)
Link cover