Daikin FTXTM30M2V1B - FLASH STREAMER AIR PURIFYING Operation; FIREPLACE LOGIC Operation

English
22
FLASH STREAMER AIR PURIFYING
and FIREPLACE LOGIC Operation
FLASH STREAMER AIR PURIFYING Operation
The absorption power of the Titanium apatite deodorizing fi lter and air supply fi lter and the
resolving power of the streamer discharge reduce bad odors and viruses, cleaning the room air.
What is streamer discharge?
• It generates high-speed electron with high oxidizing power in the unit to resolve odor and harmful gas.
(It is safe because the high-speed electron is generated and goes away inside the unit.)
• The streamer discharge fi zzes, but this is not a malfunction.
NOTE
■
FLASH STREAMER AIR PURIFYING operation
• The streamer discharge energy and Titanium apatite deodorizing fi lter clean the air in the room.
• When the airfl ow becomes weak during operation, the streamer discharge may stop temporarily to prevent a small amount of ozone smell
coming from the air outlet.
HOT AIR FIREPLACE LOGIC - heating mode only
■
To start operation
■ For heating mode
Press
C
lean
/
Fireplace
and select the desired mode.
• Each time the
C
lean
/
Fireplace
is pressed the different symbol will appear in the
remote controller’s display.
blank
No SettingCLEAN FIRE PLACE Combination
■ For Auto / Cooling / Fan / Dry mode
Press
C
lean
/
Fireplace
• ” ” Is displayed
■
To cancel operation
Press
C
lean
/
Fireplace
and select “blank” on the LCD.
Clean/Fireplace
Fireplace logic support equal distribution from external heat
source, such as fi re place, across the room.
How it works?
If the temperature in the room reaches the desired point set by
user, the operation FIREPLACE LOGIC will start automatically.
The unit will distribute hot air from the external source across
the room using the unit’s fan.
The fan speed and the intensity of distribution depends on
difference between temperature set by user and actual
temperature in the room (in case of big difference between
these temperatures the air distribution will be more intensive).