Daikin FTYN25DV3B ATY20DV2 - Page 96

SiBE01-503 Indoor Unit
Removal Procedure 87
4
Disengage the hooks of
the pipe retainer on the
back.
5
Pull auxiliary pipe
forward to an angle of
10 to 20 degrees.

Be careful to prevent pipe
deformation.
6
Disengage hooks
located right and left
side, and pull heat
exchanger forward.
The hooks are
symmetrically placed in
the right and the left.

Lift the heat exchanger
slightly upward to the right,
and the left hook comes to
be disengaged easily.
Step Procedure Points