Daikin FTYN35KAV1A - Page 14

Removal of Electrical Box Si041137
12 Removal Procedure
5
Disconnect the
connector for the swing
motors [S41].
6
Release the harness for
the swing motors from
the hook.
7
Cut the clamp near the
indoor heat exchanger
thermistor.

Some models have no clamp
near the indoor heat
exchanger thermistor.
8
Pull out the indoor heat
exchanger thermistor.

The position of the indoor
heat exchanger thermistor
varies by model.

Be careful not to lose the clip
of the thermistor.
Step
Procedure Points
(R7935)
[S41]
(R7936)
(R13104)
(R7937)
Indoor heat exchanger thermistor
Clip
(R11268)