Why is the cooling/heating effect poor on my Daikin FTYN71GV1A?
If your Daikin Air Conditioner's cooling or heating effect is poor, ensure the air filters are clean. Also, check for any obstructions blocking the air inlet or outlet of both the indoor and outdoor units. Verify that the temperature setting is appropriate, all windows and doors are closed, and the airflow rate and direction are correctly set.
Why my Daikin FTYN71GV1A Air Conditioner does not operate and the OPERATION lamp is off?
If your Daikin Air Conditioner does not operate and the OPERATION lamp is off, check if a breaker has been turned OFF or a fuse has blown. Also, verify if there is a power failure, if the batteries are correctly set in the remote controller, and if the timer setting is correct.
Why does my Daikin FTYN71GV1A Air Conditioner outdoor unit emits water or steam?
In HEAT mode, the frost on the outdoor unit of your Daikin Air Conditioner melts into water or steam when the air conditioner is in defrost operation. In COOL or DRY mode, moisture in the air condenses into water on the cool surface of outdoor unit piping and drips.
How to fix the odor coming from my Daikin Air Conditioner indoor unit?
If the indoor unit of your Daikin Air Conditioner gives out an odor, it is recommended to have the indoor unit cleaned by a technician. Contact the service shop where you purchased the air conditioner.
What to do if my Daikin FTYN71GV1A Air Conditioner stops suddenly and the OPERATION lamp flashes?
If your Daikin Air Conditioner operation stops suddenly and the OPERATION lamp flashes, clean the air filters or remove any obstacles. Then, turn the breaker OFF, turn it ON again, and try operating the air conditioner with the remote controller. If the lamp continues to blink, it is recommended to contact the service shop where you bought the air conditioner.
What to do if my Daikin Air Conditioner operation stopped suddenly, but the OPERATION lamp is on?
If the operation of your Daikin Air Conditioner stopped suddenly, but the OPERATION lamp is still on, the unit will automatically resume operation in about 3 minutes.
Why does mist come out of the indoor unit of my Daikin FTYN71GV1A Air Conditioner?
If mist comes out of the indoor unit of your Daikin Air Conditioner, this can happen when the air in the room is cooled into mist by the cold airflow during cooling operation. It can also occur because the air in the room is cooled by the heat exchanger and becomes mist during defrost operation.
Why is the outdoor fan rotating when my Daikin FTYN71GV1A is not in operation?
If the outdoor fan of your Daikin Air Conditioner rotates while the unit is not in operation, it may be due to system protection. After operation stops, the fan continues rotating for another 60 seconds. Also, when the outdoor temperature is very high, the fan may start rotating for system protection even when the air conditioner is not in operation.
What to do if my Daikin FTYN71GV1A heating operation stops suddenly and a flowing sound is heard?
If the heating operation of your Daikin Air Conditioner stops suddenly and a flowing sound is heard, you should wait for about 4 to 12 minutes.
General| Brand | Daikin |
|---|---|
| Model | FTYN71GV1A |
| Category | Air Conditioner |
| Language | English |
Guidelines for choosing appropriate locations for unit installation.
How to minimize operational noise and vibration impact on neighbors.
Instructions regarding dedicated power circuits for the unit.
Advice on professional help for moving or remodeling the air conditioner.
Labels and diagrams for the indoor unit's components.
Labels and diagrams for the outdoor unit's components.
Explains the remote's signal transmitter and its display functions.
Details the purpose of various buttons on the remote controller.
Step-by-step guide for installing batteries in the remote.
Recommendations for battery longevity and replacement timing.
Proper aiming, communication range, and operational distance of the remote.
Instructions for installing the remote controller holder on a wall.
Advice on cleaning and avoiding interference for optimal performance.
Steps to set and confirm the current time on the remote controller.
Recommendations for efficient operation and reducing energy consumption.
Information on recommended temperature and humidity ranges for operation.
How to initiate and terminate the air conditioner's operation.
Adjusting the desired temperature for cooling, heating, or auto modes.
How to select different air flow rates for various operation modes.
Explanations for HEAT, COOL, DRY, and AUTO operations.
How to swing or fix the horizontal air flow direction (flaps).
Manual adjustment of the vertical air flow direction (louvers).
Important safety and operational notes regarding flap and louver movement.
How to engage the mode for maximum cooling/heating effect.
Instructions to return to normal operation from Powerful mode.
Notes on specific functions unavailable and settings during Powerful operation.
How to set the unit to turn off automatically at a specified time.
Procedure to disable a previously set OFF timer.
Automatic temperature adjustment for comfortable sleep during OFF timer operation.
How to set the unit to turn on automatically at a specified time.
Procedure to disable a previously set ON timer.
Instructions for setting both ON and OFF timers simultaneously.
When to reset the timer settings after power interruptions.
Step-by-step instructions for removing, cleaning, and reattaching the front panel.
Safety warnings and tips for handling the front panel during removal/attachment.
Procedure for cleaning the standard air filters.
Instructions for washing and maintaining the special air-purifying filter.
Guidance on when and how to replace the air-purifying filter.
Explains issues with dirty filters and how to order replacements.
Important checks to perform before storing the unit for extended periods.
Steps for preparing the unit for storage, including fan operation and battery removal.
Reasons for delayed operation start and recommended waiting times.
Explains why heating might start late or stop suddenly with a flowing sound.
Causes for water or steam from the outdoor unit during different modes.
Explains causes for odor or mist from the indoor unit and potential solutions.
Checks to perform when the unit does not start and the operation lamp is off.
Reasons for reduced performance and checks to ensure optimal effect.
Troubleshooting steps when the unit stops abruptly with a flashing lamp.
How to handle malfunctions potentially caused by lightning or radio waves.
Situations requiring immediate contact with the service shop.
How the unit behaves and what to do after a power outage.
Guidelines for environmentally sound disposal of the unit and its parts.
Advice on professional maintenance for long-term performance and longevity.
To Next Page
