10
OPERATION
AUTO · DRY · COOL · HEAT · FAN Operation
The air conditioner operates with the operation mode of your
choice.
From the next time on, the air conditioner will operate with the
same operation mode.
■ To start operation
1. Press “MODE selector button”
and select a operation mode.
•
Each pressing of the button advances the
mode setting in sequence.
:AUTO
:DRY
: COOL
:HEAT
:FAN
2. Press “ON/OFF button” .
•
The OPERATION lamp lights up.
■ To stop operation
3. Press “ON/OFF button” again.
•
Then OPERATION lamp goes off.
■ To change the temperature setting
4. Press “TEMPERATURE adjustment button”.
DRY or FAN mode AUTO or COOL or HEAT mode
The temperature setting is not variable.
Press “
” to raise the temperature and press
“
” to lower the temperature.
Set to the temperature you like.
2, 3
1
4
5
01_En_3P232468-5.fm Page 10 Wednesday, June 4, 2008 9:28 AM
To Next Page
Loading...
Need help?
General
