SiBE611027_A Operation Manual
Operation Manual 20
5
Indoor Unit
1. Air filter
3. Air inlet
4. Front panel
5. Room temperature sensor:
6. Display
7. Air outlet
8. Flap (horizontal blade): (page 12)
9. Louvers (vertical blades):
10. Model name plate
11. Indoor unit ON/OFF switch:
12. OPERATION lamp (green)
13. TIMER lamp (yellow): (page 16)
14. Air outlet selection switch:
(page 13)
15. Signal receiver:
2. Titanium apatite photocatalytic
air-purifying filter:
• These filters are attached to the inside
of the air filter.
• It senses the air temperature around
the unit.
• It receives signals from the remote controller.
• When the unit receives a signal, you will
hear a short beep.
• Operation start ........beep-beep
• Settings changed .....beep
• Operation stop..........long beep
• The operation mode will be the mode that
was in effect before the unit was stopped.
• This switch is useful when the remote
controller is missing.
• The louvers are inside of the air outlet.
(page 12)
To Next Page
Loading...
