Daikin FWXV20AVEB - Removal of Main Electrical Box; Sub Electrical Box

SiBE611027_A Indoor Unit
Removal Procedure 56
1.3 Removal of Main Electrical Box / Sub Electrical Box
Procedure Warning Be sure to wait 10 minutes or more after turning off all power supplies
before disassembling work.
Step Procedure Points
1
2
Remove the 2 earth
screws.
Unfasten the hook and
open the sensor PCB
fixing plate.
3 Remove the front
shield plate.
4 Remove the 1 screw of
the wiring fixture and
remove the 4 screws of
the connection wires.
5 Remove the screw and
remove the terminal
board.
Hook
(R12439)
Earth
screw
Sensor PCB
fixing plate
(R12440)
Front shield
plate
Wiring fixture
(R12441)
Connection
wires
(R12442)
Terminal
board