Daikin FWXV20AVEB - Field Settings; Model Type Setting

SiBE611027_A Field Settings
Trial Operation and Field Settings 78
4. Field Settings
4.1 Model Type Setting
ARC452A15

This remote controller is common to heating/cooling use and heating only use. Use the DIP
switch on the remote controller to set heating/cooling use or heating only use.

Make the setting as shown in the illustration. (The factory set is heating/cooling use.)
• Heating/cooling use: Set the DIP switch to H/C.
• Heating only use: Set the DIP switch to H/O.
H/C H/O
DIP switch
(R12707)