SiBE611027_A Operation Manual
Operation Manual 32
20
WEEKLY TIMER Operation
6. Press to select the desired time.
7. Press .
8.
9. Press .
10. Press to complete the setting.
Press to select the desired
temperature.
• The time can be set between 0:00 and 23:50 in 10 minute
intervals.
•
To return to the ON/OFF TIMER mode setting, press
.
•
Go to step 9 when setting the OFF TIMER.
•
The time will be set.
•
“ ” and the temperature blink.
•
The temperature can be set between 10˚C and 32˚C.
Cooling: The unit operates at 18˚C even if it is set at 10
to 17˚C.
Heating: The unit operates at 30˚C even if it is set at 31
to 32˚C.
•
To return to the time setting, press .
•
The set temperature is only displayed when the mode
setting is on.
•
The temperature will be set and go to the next reservation
setting.
•
To continue further settings, repeat the procedure from step 4.
•
Be sure to direct the remote controller toward the indoor unit and check for a receiving tone
and flashing the OPERATION lamp.
•
“ ” is displayed on the LCD and WEEKLY TIMER operation is activated.
•
The TIMER lamp lights up.
•
A reservation made once can be easily copied and the same settings used for another day of
the week.
Refer to copy mode. (page 22)
To Next Page
Loading...
