Need help?Do you have a question about the Daikin Madoka and is the answer not in the manual?
General| Display | LCD |
|---|---|
| Communication | Wired |
| Colour | White |
| Power Supply | Via the indoor unit |
| Operating Temperature | 0°C to 50°C |
| Compatibility | Daikin air conditioners |
| Functions | Temperature control, mode selection, fan speed |
| Power Source | Indoor unit |
Safety precautions for users of the air conditioning equipment.
Safety precautions for installers of the air conditioning equipment.
Information on using the Madoka Assistant app for advanced settings.
Details the compliance of the BRC1H radio equipment type.
Guidance on accessing technical engineering data for the controller.
Explains the different operating modes (Normal, Alarm only, Supervisor).
Describes the functions of the controller's buttons for operation.
Defines the meaning of various status icons displayed on the controller.
Explains the behavior and meaning of the controller's status indicator.
Covers home screen, main menu, and basic controller interaction.
Details the various operation modes for the indoor unit (Cooling, Heating, Fan Only, etc.).
Instructions on how to set the target temperature for operation modes.
Guides users on setting the date and time for connected indoor units.
Covers adjusting airflow direction and fan speed for indoor units.
Details ventilation modes and rates for heat reclaim units.
Points to the Madoka Assistant app for advanced controller operations.
General guidance on controller indications for maintenance needs.
How the controller indicates system errors and initial troubleshooting steps.
Information on refrigerant leak alarms and how to stop them.
Steps to silence the refrigerant leak detection alarm.
Specifies the required wire specifications for controller installation.
Instructions for mounting the controller's rear casing to a surface.
Guides on connecting controller wiring to the indoor unit terminals.
Detailed steps for connecting the controller's electrical wiring.
Precautions and steps for securely closing the controller after wiring.
How the controller powers up and initializes when connected.
Critical safety warnings before performing maintenance or repair activities.
Instructions for safely cleaning the controller's surfaces.
Explains the controller's indication for when the indoor unit filter needs cleaning.
Steps to clear the filter cleaning reminder from the controller's display.
To Next Page
