SiBE81-623A Troubleshooting
Photocatalytic Air Purifiers 29
6. Troubleshooting
6.1 Basic Inspection
It is not malfunction
Troubleshooting with Airflow Rate Indicator
(1) Is the connector for the PCB plugged
in? Or is there any poor connection?
(2) Is the wire harness broken?
Red lamp is blinking.
Time for cleaning the
plasma ionizer.
Red lamp is on or blinking.
Replace the pleated filter and
press the reset button.
The airflow rate indicators blink simultaneously.
The DC fan is locked.
To Next Page
Loading...
