www.DaikinApplied.com 9 OM 1280-2 • MICROTECH UNIT CONTROLLER
Setting Clock/Schedules
• Press HOME or BACK to return to the “Live” screen
• Set”
• Press
ENTER to select
•
Set-Schedule”
• Press
ENTER to select
•
• Press
ENTER to select
•
(example “Set-Sched-Days-Sun”) and press
ENTER to
select
• ENTER
to select
•
• If prompted, enter the
USER PASSWORD (00068). If not
prompted, skip this step
•
(Military Time values from 0-23 are valid)
• Optional – Enter the minutes (0-59 are valid)
• Repeat as necessary for all days of week
NOTE: For multiple occupied and unoccupied time periods,
be careful not to over-lap times. All times are entered
in military time where 00 is 12:00 AM and 23 is 11:00
PM
Viewing Active Alarms
• Press HOME
•
Alarms”
• Press
ENTER to select this submenu
• Press
ENTER again to enter the “Alarms-Active“ to view
any alarms currently active
• Press
ENTER with ‘ActiveAlarm’ selected to bring up a
text description of the highest priority active alarm
Viewing Alarm History
• Press HOME
•
Alarms”
• Press
ENTER to select this submenu
•
Alarms-History”
• Press
ENTER to select this submenu
• Press
ENTER with ‘HistoryAlarms’ selected to bring up a
text description alarms that have occurred previously
— Active designates when the alarm occurred
— Inactive designates when the alarm was cleared
—
recent alarms
Clearing Active Alarms
• Press HOME
•
Set”
• Press ENTER to select this submenu
•
Set-Alarms”
• Press
ENTER
•
KeyRstAls” and
• Press
ENTER
• Clear’
• Press
ENTER to clear the alarm
NOTE: If the alarm condition still exists the unit will go back
into the alarm state
To Next Page
Loading...
Need help?
General