Daikin MPS030 F - Page 129

Figure 102: Optional Outdoor Air Monitor – Changing the System of Units
Press and release ↑/↓ during normal operation to select
Sets system of units to I-P
(FPM, CFM, sq.ft., in.w.g., °F)
Sets system of units to S-I
(MPS, LPS, sq.M., Pa., °C)
IP/SI Units ↓
↑/↓ (Select)
During
Normal Operation
Enter (Move →)
Esc (Move ←)
* Factory Default/Current Setting
Enter (Move →)
Esc (Move ←)
Enter
(Action, Move →→)
Esc
(Move ←←)
*IP/SI=IP SYS IP/SI=IP SYS ↓
IP/SI=SI SYS ↑
Set System?
Set Up ↓↑
Comm Set Up ↓↑
Ethernet Set Up ↓↑
Diagnostics ↑
www.DaikinApplied.com 129 IM 1058-8 • MAVERICK II ROOFTOP SYSTEMS
aPPendIx – keyPad/dIsPlay menU sTrUCTUre