Daikin Perfera FVXM A Series - Page 56

3 | Components
Service manual
56
RXM20~71R + ARXM25~71R + FTXM20~71R + ATXM25~50R +
FVXM25~50A
Split New Perfera R32
ESIE20-11 – 2021.01
a
d
b c
a String
b Body jacket (outer)
c Top insulation
d Secondary (inner) body jacket
2 Open the body jacket.
3 Remove the top insulation from the compressor.
4 Open the secondary body jacket from the compressor.
5 Remove the body jackets from the compressor.
6 To install the compressor insulation, see "Repair procedures"[455].
To install the compressor insulation
1 Install the secondary (inner) body jacket on the compressor.
2 Install the top insulation on the compressor.
a
d
b c
a String
b Body jacket (outer)
c Top insulation
d Secondary (inner) body jacket
3 Install the (outer) body jacket around the compressor.
4 Properly fit the top insulation in the body jacket.
5 Attach all strings to secure the body jacket.
To remove the compressor
Prerequisite: Stop the unit operation via the user interface.
Prerequisite: Turn OFF the respective circuit breaker.
Prerequisite: Remove the required plate work, see "3.14Plate work"[4151].
Prerequisite: Remove the compressor insulation.