ESIE17-08 | Part 5. Appendix 5.1. Field setting
R32 Sky-Air RZAG-M
Page 106 15/11/18 | Version 1.1
6. Press Menu/Enter button. Setting confirmation screen is displayed.
7. Select Yes and press Menu/Enter button. Setting details are determined and field setting list screen returns.
8. In the case of multiple setting changes, repeat “(3)” to “(7)”.
9. After all setting changes are completed, press Cancel button twice.
10. Backlight goes out, and “Connection under check Please wait for a moment” is displayed for initialization. After the initialization, the basic screen returns.
CAUTION
• When an optional accessory is installed on the indoor unit, settings of the indoor unit may be changed. See the manual of the optional accessory.
• For field setting details of the outdoor unit, see installation manual attached to the outdoor unit.
To Next Page
Loading...
