Daikin R32 Sky-Air RZAG-M - Page 91

ESIE17-08 | Part 3. Repair 3.3. Unit specific repair procedures
15/11/18 | Version 1.1 Page 91
R32 Sky-Air RZAG-M
Figure 3-24: Removing low pressure switch
Installation
Figure 3-25: Installation
1. Wrap a wet rag around the low pressure switch.
2. Proceed in reverse order.
1. High pressure switch 3. Compressor discharge thermistor
2. Low pressure switch
CAUTION
Overheating the low pressure switch will damage or destroy it.
1
3
2