Daikin R32 Sky-Air RZAG-M - Page 93

ESIE17-08 | Part 3. Repair 3.3. Unit specific repair procedures
15/11/18 | Version 1.1 Page 93
R32 Sky-Air RZAG-M
Figure 3-26: Removing the main PCB assembly (1-phase)
Secondly, strip the Main PCB assembly (front)
14. Cut the tie wraps that fix the protection sheet; remove the protection sheet (not visible).
15. Cut the tie wrap (9).
1. Terminal block 8. Ground wire
2. Connectors 9. Tie wrap
3. Screw 10. Screw
4. Main PCB 1-phase 11. Screw
5. Lid 12. Screw
6. Screw 13. Plug
7. 7-segment display 14. Screw
72
2
2
3
3
4
5
6
5
6
8
9
9
9
10
9
13
121 1114 14