Installation Diagram
FH-CB / FHN62CV1L / FHN62CV1M
Installation Of The Indoor Unit
Indoor Unit
Outdoor Unit
Air Discharge Louver
Air Intake
Air Discharge Nozzle
Indicator Lights
Refrigerant Piping
Air Discharge Grille
Air Intake Grille
Air Filters
(Inside Air Intake Grille)
Figure A
Signal Receiver
Air Intake
10mm
Figure B
Preliminary Site Survey
• Voltage supply fluctuation must not exceed ±10% of the rated voltage. Electricity supply lines must
be independent of welding transformers which can cause high supply fluctuation.
• Ensure that the installation location is convenient for wiring and drainage.
Standard Mounting
Ensure that the overhead supports are strong enough to hold the weight of the unit. Position the hanger
rods, and check for its alignment with the unit. Also, check that the hangers are secured.
To Next Page
Loading...
