Daikin RE25JV1 - Removal of Partition Plate

Si01-752 Removal of Partition Plate
Removal Procedure 9
6. Removal of Partition Plate
Procedure Warning Be sure to wait 10 minutes or more after turning off all power supplies
before disassembling work.
Step Procedure Points
1
Disengage the
compressor lead wires
from the wire clip.
2
Remove the 2 screws
of the partition plate.
3
Pull and remove the
partition plate.
4
When restoring the
partition plate, put the
hook into the bottom
frame.
(R12800)
Compressor lead wire
Wire clip
(R1871)
(R12801)
(R1873)
Bottom
frame
Hook