EasyManua.ls Logo

Daikin REYAQ10P7Y1B - User Manual

Daikin REYAQ10P7Y1B
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
VRVIII system air conditioner
OPERATION MANUAL
REYAQ10P7Y1B
REYAQ12P7Y1B
REYAQ14P7Y1B
REYAQ16P7Y1B
system air conditioner

Questions and Answers

  • T
    Thomas MerrittAug 12, 2025
    What to do if my Daikin Air Conditioner system does not operate at all?
    • C
      cowanelizabethAug 12, 2025
      If your Daikin Air Conditioner system isn't operating at all, first, verify there isn't a power failure. If power is available, check the fuse and breaker. Replace the fuse or reset the breaker, if needed.
  • N
    Nicole WeaverAug 27, 2025
    What to do if my Daikin REYAQ10P7Y1B Air Conditioner goes into fan only operation, but stops when heating or cooling is activated?
    • T
      Tracy DillonAug 27, 2025
      If your Daikin Air Conditioner goes into fan-only operation and stops when switching to heating or cooling, start by checking if any obstacles block the air inlet or outlet of the outdoor or indoor unit. Remove any obstructions to ensure proper ventilation. Also, check if the remote controller display shows the air filter cleaning notification.
  • L
    Leah TurnerSep 2, 2025
    What to do if the display TEST, the unit number and the operation lamp TEST flash and the malfunction code appears on my Daikin REYAQ10P7Y1B Air Conditioner?
    • J
      jenkinselizabethSep 2, 2025
      If the display TEST, the unit number, and the operation lamp TEST flash and a malfunction code appears on your Daikin Air Conditioner, notify your dealer and report the malfunction code.
  • A
    Angela JensenSep 10, 2025
    Why is my Daikin Air Conditioner system operating, but the cooling or heating is insufficient?
    • L
      Leslie LewisSep 12, 2025
      If your Daikin Air Conditioner is operating, but the cooling or heating is insufficient, try the following: * Check if the air inlet or outlet of the outdoor or indoor unit is blocked by obstacles. If it is, remove any obstacle to ensure proper ventilation. * Check if the air filter is clogged. * Check the temperature setting and fan speed setting on your remote controller. * Ensure doors and windows are closed to prevent wind from entering. * Reduce the number of occupants in the room during cooling operation. * Reduce any excessive heat sources in the room. * Block direct sunlight using curtains or blinds. * Ensure the air flow angle is properly set.

Daikin REYAQ10P7Y1B Specifications

General IconGeneral
ModelREYAQ10P7Y1B
CategoryAir Conditioner
Cooling Capacity2.8 kW
Energy Efficiency Rating (Cooling)A+++
Energy Efficiency Rating (Heating)A++
Noise Level (Indoor Unit)19 dBA
Noise Level (Outdoor Unit)46 dBA
Power Supply220-240 V, 50 Hz
RefrigerantR-32

Related product manuals