Need help?Do you have a question about the Daikin RXS20G2V1B9 and is the answer not in the manual?
General| Model | RXS20G2V1B9 |
|---|---|
| Category | Heat Pump |
| Type | Split System |
| Cooling Capacity | 2.0 kW |
| Heating Capacity | 2.5 kW |
| Refrigerant | R-32 |
| Indoor Unit Dimensions (H x W x D) | 290 x 770 x 230 mm |
| Outdoor Unit Dimensions (H x W x D) | 550 x 800 x 285 mm |
| Energy Label Cooling | A++ |
| Energy Label Heating | A+ |
| Power Supply | 220-240V / 50Hz / 1Phase |
| Noise Level (Indoor Unit) | 19 dB(A) |
Details functions available for cooling-only models, covering basic, compressor, and airflow controls.
Details functions available for heat pump models, covering basic, compressor, and airflow controls.
Provides detailed technical specifications for cooling-only models, including capacity, airflow, and power consumption.
Offers detailed technical specifications for heat pump models, covering capacity, airflow, and power consumption.
Illustrates connector identification and functions for the indoor unit's control and receiver PCBs.
Details connector identification and functions for the outdoor unit's filter and main PCBs.
Explains key operational functions like frequency control, airflow, and automatic modes.
Details control specifications including mode hierarchy, frequency control, and protection functions.
Details sensor malfunction detection, overcurrent/overload detection, and refrigerant shortage control methods.
Covers remote control, various operation modes (AUTO, DRY, COOL, HEAT, FAN), and airflow adjustments.
Covers remote control, various operation modes, and airflow adjustments for ATXS series.
Details INTELLIGENT EYE sensor use for comfort and energy saving, adjusting airflow based on occupancy.
Offers a troubleshooting guide for common symptoms like non-operation, intermittent stops, and poor cooling/heating.
Comprehensive guide to diagnosing and resolving various system errors and abnormalities.
Lists all error codes and their corresponding descriptions for system diagnosis.
Step-by-step instructions for removing components like air filter, front panel, heat exchanger, and PCB.
Guides on removing outer panels, electrical box, thermistors, PCB, and compressor for specific models.
Guides on removing outer panels, fan motor, electrical box, PCB, sound blanket, and compressor.
Guides on performing trial operation to ensure all functions and parts are working correctly.
Covers model type setting, multi-unit installation, standby saving, and facility settings.
Explains the importance and procedure for applying silicon grease for heat radiation on PCBs.
Shows refrigerant flow and pipe sizes for indoor and outdoor units in cooling and heat pump modes.
Presents wiring diagrams for indoor and outdoor units, detailing PCB connections and component layouts.
To Next Page
