Daikin Siesta ATXM35N2V1B - To Start;Stop Comfort and Intelligent Eye Operation; Powerful Operation; To Start;Stop Powerful Operation

5 | Operation
User reference guide
23
ATXM20~50N2V1B
Daikin room air conditioner
4P518786-2F – 2020.05
Vertical angle (side view)
90°
7 m
Horizontal angle (top view)
55°
7 m
55°
▪ Detection sensitivity. Changes according to location, the number of persons in
the room, temperature range, etc.
▪ Detection mistakes. The sensor may mistakenly detect pets, sunlight, moving
curtains, etc.
5.6.3 To start/stop Comfort and Intelligent eye operation
1 Press one or more times.
Result: The setting will change as follows:
Display Operation
Comfort airflow
Intelligent eye
+
Comfort airflow and Intelligent eye
— Both deactivated
Note: If there are people close to the front of the indoor unit or there are too
many people, use both operations at the same time.
2 To stop operation, press until both symbols disappear from the LCD.
5.7 Powerful operation
This operation quickly maximizes the cooling/heating effect in any operation mode.
You can get the maximum capacity.
INFORMATION
Powerful operation CANNOT be used together with Econo, Comfort airflow,
Intelligent eye and Outdoor unit quiet operation. The last selected function takes
priority.
Powerful operation will NOT increase the capacity of the unit if it already operates at
maximum capacity.
5.7.1 To start/stop Powerful operation
1 Press to start.
Result: is displayed on the LCD. Powerful operation runs for 20minutes;
after that, operation returns to the previously set mode.