EasyManua.ls Logo

Daikin Siesta ATXM35N2V1B - To Re-Install the Front Panel; To Take Following Items into Account before a Long Idle Period

Daikin Siesta ATXM35N2V1B
56 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
7 | Maintenance and service
User reference guide
42
ATXM20~50N2V1B
Daikin room air conditioner
4P518786-2F – 2020.05
7.9 To re-install the front panel
1 Attach the front panel. Align the shafts with the slots and push them all the
way in.
2 Close the front panel slowly; press at both sides and at the centre.
7.10 To take following items into account before a long idle period
Operate the unit several hours in fan only mode to dry the inside of the unit.
1 Press and select operation.
2 Press and start operation.
3 After operation stops, turn the breaker off.
4 Clean the air filters and replace them in their original position.
5 Remove the batteries from the user interface.
INFORMATION
It is recommended to have periodical maintenance performed by a specialist. For
specialist maintenance, contact your dealer. Maintenance costs shall be borne by the
customer.
In certain operating conditions the inside of the unit may get dirty after several
seasons of use. This results in poor performance.

Table of Contents

Related product manuals