POWERFUL Operation
POWERFUL operation quickly maximizes the cooling (heating)
effect in any operation mode. You can get the maximum capacity.
To start POWERFUL operation
1. Press “POWERFUL button”.
• POWERFUL operation ends in 20 minutes.
Then the system automatically operates again with the
settings which were used before POWERFUL operation.
• When using POWERFUL operation, there are some
functions which are not available.
• “ ” is displayed on the LCD.
To cancel POWERFUL operation
2. Press “POWERFUL button” again.
• “ ” disappears from the LCD.
NOTE
Notes on POWERFUL operation
• POWERFUL Operation cannot be used together with QUIET Operation. Priority is given to
the function of whichever button is pressed last.
• POWERFUL Operation can only be set when the unit is running. Pressing the operation stop
button causes the settings to be canceled, and the
“”
disappears from the LCD.
•In COOL and HEAT mode
To maximize the cooling (heating) effect, the capacity of outdoor unit must be increased and
the air flow rate be fixed to the maximum setting.
The temperature and air flow settings are not variable.
•In DRY mode
The temperature setting is lowered by 4.5˚F and the air flow rate is slightly increased.
•In FAN mode
The air flow rate is fixed to the maximum setting.
1, 2
To Next Page
Loading...
Need help?
General