RA Indoor Unit SiBE121021_C
208 Operation Manual
2.3.11 TIMER Operation
TIMER Operation
To cancel the OFF TIMER operation
NOTE
NIGHT SET MODE
Timer functions are useful for automatically switching the
air conditioner on or off at night or in the morning. You
can also use OFF TIMER and ON TIMER in combination.
To use OFF TIMER
operation
When the OFF TIMER is set, the air conditioner automatically adjusts the temperature
setting (0.5˚C up in COOL, 2.0˚C down in HEAT) to prevent excessive cooling (heating) for
your pleasant sleep.
• Check that the clock is correct.
If not, set the clock to the present time.
1. Press “OFF TIMER button”.
is displayed.
blinks.
2. Press “TIMER Setting button”
until the time setting reaches the
point you like.
• Every pressing of either button increases or
decreases the time setting by 10 minutes.
Holding down either button changes the
setting rapidly.
3. Press “OFF TIMER button” again.
• The TIMER lamp lights up.
4. Press “CANCEL button”.
• The TIMER lamp goes off.
• When TIMER is set, the present time is not displayed.
• Once you set ON, OFF TIMER, the time setting is kept in the memory. (The memory is
canceled when remote controller batteries are replaced.)
• When operating the unit via the ON/OFF Timer, the actual length of operation may vary from
the time entered by the user.
To Next Page
Loading...
Need help?
General
