3
6
• Systems • VRVII & VRV-WII features
15
• VRVII & VRV-WII features
6 Simple and rapid installation
6-1 Short installation time - VRVII & VRV-WII
• Thanks to small bore refrigerant pipes and REFNET piping options, the VRVII/VRV-WII piping system can be installed very easily and quickly.
• Installation of the VRVII/VRV-WII system can also be implemented floor by floor, so that sections of the building can be put into use very quickly, or
enabling the air conditioning system to be commissioned and operated in stages, rather than on final completion of the project.
6-2 Dramatic reduction in installation space
VRVII
VRVII features a dramatic reduction in installation space - for example, the 16hp outdoor unit is housed in a single casing outdoor unit, providing a 50 %
reduction in required installation space.
VRV-WII
The adoption of a new water heat exchanger and optimization of the refrigerant control circuit has resulted in the industry’s most compact and
lightweight design. The unit weight of 150kg and height of 1,000mm makes installation easy. Stacked configuration is also possible, contributing further
to space savings.
Installation space (16 HP)
3.56 m
2
→ 1.88 m
2
RSXYP
➧
Approx.
50 %
reduction
Stacked configuration is possible.
3200mm
or higher
Ceiling height)
(Floor level)
(100-300mm)
To Next Page
Loading...
