6
• Systems • VRVII & VRV-WII features
17
• VRVII & VRV-WII features
6 Simple and rapid installation
6-5 Unified REFNET piping - VRVII
• The unified Daikin REFNET piping system is especially designed for simple installation
• The use of REFNET piping in combination with electronic expansion valves, results in a dramatic reduction in imbalance in refrigerant flowing between
indoor units, despite the small diameter of the piping.
• REFNET joints and headers (both accessories) can cut down on installation work and increase system reliability.
• Compared to regular T-joints, where refrigerant distribution is far from optimal, the Daikin REFNET joints have specifically been designed to optimise
refrigerant flow.
6-6 Increased installation flexibility - VRVII
Outdoor units can be installed far back from former location.
6-7 High external static pressure : 6mm H
2
O - VRVII
Daikin now offers high external static pressure as standard to meet requirements of indoor installation.
6-8 4-way piping connection - VRVII & VRV-WII
VRVII series not only offer the possibility to run piping from the front, but also from the left, right or bottom, thus providing greater freedom of layout.
REFNET joint Attached insulators for REFNET joint REFNET header Attached insulators for REFNET header REFNET joint T-joint
DuctDuct
current
Front
Left
Bottom
Right
To Next Page
Loading...
