• VRVII & VRV-WII features
6
• Systems • VRVII & VRV-WII features
16
6 Simple and rapid installation
6-3 Modular & lightweight
• Modular design enables units to be joined together in rows with an outstanding degree of uniformity.
• The design of the outdoor units is sufficiently compact to allow them to be taken up to the top of a building in a commercial elevator, overcoming
site transportation problem, particularly when outdoor units need to be installed on each floor.
6-4 No structural reinforcement necessary - VRVII
• The galbarium steel allows the use of block foundations. Earlier VRVK and L systems required full beam foundations.
• Thanks to the lightweight and vibration-free construction of the outdoor units, floors do not need to be reinforced, reducing the overall cost of the
building.
10HP
WEIGHT REDUCTION 100 % 84 % 58 %
Reduction
of 42%