Daikin VRV W T-series - Page 28

27 English
Menu Options
Display Item
Operation
1
Setting
Display
Display Mode Standard
Display Item None
●Navigate to the display screen. (See page 25.)
●Press buttons to select Display Item on the display screen.
Press Menu/OK button to display the display item screen.
2
Setting
Display Item
Display
None
●Pressing buttons displays the following.
None Outside Air Temp
Room Temp
System
●Be sure to read the following notes regarding display of room temperature and outside
air temperature.
Room Temp
.......... The temperature at the remote controller.
The temperature that is detected may be a󰀨ected by the location of the
remote controller.
Outside Air Temp
.......... It is not displayed for this system.
●After setting, press Menu/OK button to conrm settings and return to the
basic screen.
Current Settings
Manipulating the current settings
Operation
1
Setting
Main Menu
Configuration
Current Settings
Clock & Calendar
Daylight Saving Time
Language
2/2
●Display the main menu screen. (See page 16.)
●Press buttons to select Current Settings on the main menu screen
and press Menu/OK button.
2
Setting
Current Setting 1/2
Air Flow Direction Swing
Ventilation Rate Low
Ventilation Mode Auto
Schedule Enable
Off Timer Disable
Display Standard
●A list showing the current setting status will appear.
Press buttons to go to the next item.
●Pressing the Cancel button takes you back to the main menu screen.
Air Flow Direction O󰀨 Timer
Ventilation Rate Display
Ventilation Mode Display item
Schedule
Display items
* Display items may di󰀨er depending on the model.
Only the items that can be set are displayed.