Daikin WGZ200DW - Menu Descriptions

OMM 1130-2 53
Figure 10, Menu Matrix
“MENU”
“VIEW” MENUS
UNIT
CIRCUITS
REFRIGERANT
FANS
EVENTS
VIEW UNIT
STATUS
(1)
VIEW UNIT
TEMP
(1)
VIEW
CIRC #1
STATUS
(1)
VIEW
CIRC #2
STATUS
(1)
VIEW
REFRIGERANT
CIRCUIT #1
(1)
VIEW
REFRIGERANT
CIRCUIT #2
(1)
VIEW
FAN/TOWER
(1)
VIEW EVENT (1)
VIEW UNIT
STATUS
(5)
VIEW UNIT
TEMP
(2)
VIEW
COMP #1
STATUS
(3)
VIEW
CIRC #2
STATUS
(3)
VIEW EVAP
(2)
VIEW EVAP
(2)
VIEW
FAN/TOWER
(n)
VIEW EVENT (n)
(Ri
ght side of matrix continued from above)
“ALARM” MENUS “SET” MENUS TEST
ALARM LOG
(LAST)
TYPE, TIME
ACTIVE ALARM (1)
TYPE, TIME
SET UNIT
SPs, (1)
SET COMP
SPs (1)
SET LIMIT
ALARMS (1)
SET FANS (1)
STAGES
FANTROL
SET
TOWER
(1)
TEST UNIT
(1)
ALARM LOG
(NEXT TO LAST)
ACTIVE ALARM (2)
TYPE, TIME
ADDITIONAL
SET UNIT SPs,
(2)
SET COMP
SPs
(2)
SET LIMIT
ALARMS (2)
SET FANS (2)
STAGE ON
SET
TOWER
(2)
ALARM LOG
(SECOND TO
LAST)
ACTIVE ALARM (3)
CLEAR/VIEW
SET UNIT SPs,
(3)
SET LIMIT
ALARMS (3)
SET FANS (3)
STAGE OFF
SET
TOWER
(3)
ALARM LOG
LAST 25 SHOWN
SET UNIT SPs,
(4)
(to 13)
SET TOWER
(to n)
TEST UNIT
(7)
Sel
ection can be made within the matrix by using the LEFT/RIGHT keys to move between columns and
the UP/DOWN keys to move between rows.
Menu Descriptions
This section contains information on each screen. The menu screens are in order of the matrix in Figure
10 going from left to right and down when there are sub-menus. Many menus are self-explanatory. A
Setpoint menu allows selection of whether the unit has a water-cooled condenser, WaterCooled = Y (Yes)
or a remote condenser, WaterCooled = N (No). This selection will alter some menus as appropriate to the
type of condenser.
Screen Definitions – MENU
Top level menu:
< ALARM
< VIEW
< SET
<
ALARM menu:
ALARM < ACTIVE
< LOG
<
<
⇐ Continued ⇐